 Friends links |
|
| Picture |
Heading |
Updated |
 |
DIN Fittings Adjustable
Definition: Adjustable end is male thread stud, it consist of locknut, back-up washer, o-rings and retaining ring. DIN fittings is standard end of 24 deg cone connector and cutting ring fittings to connect steel pipe, adapters or hose assembly, adjustable |
2025-04-04 |
 |
SAE Split Flange Clamps
SPLIT FLANGE CLAMPS(CODE 62),Code 61 Split Flange Clamp series.1.Split Flange Clamps, SAE J518 define the four blot split flange half, also be equal to BS ISO 6162-1/2:2012 version, it is a hydraulic flanged tube, pipe, hose connection. Flange connection |
2025-04-04 |
 |
DIN Fittings Swivel
1. Definition: 24°DKO swivel connector is according to DIN 3861/DIN EN ISO 8434-4 standard, this end including Fitting body, Nut, O-ring and thrust wire (assembly). There are two types of usage, One is 24°welding cone type nipple (will need nut and o-ring |
2025-04-04 |
 |
Hydraulic Fittings DIN Union
1. Definition: DIN 24°cone connections is according to standard of DIN 3861/ISO 8434-1dimension, it is German DIN(DEUTSCHE INDUSTRIAL NORME) type. Union type require the all tube end size is the same as DIN 3861 required 24 deg cone from tube to tube.2. M |
2025-04-04 |
|
DIN Fittings Adjustable
Definition: Adjustable end is male thread stud, it consist of locknut, back-up washer, o-rings and retaining ring. DIN fittings is standard end of 24 deg cone connector and cutting ring fittings to connect steel pipe, adapters or hose assembly, adjustable |
2025-04-04 |
 |
DIN Fittings Port Styles
1. DIN Tube Fittings Adapters have Metric male stud, BSPP male stud, UNF male stud, sealing types have Eolastic seal ED, O-ring, O-ring with retaining ring, Metal cutting face, sealing washer and taper thread. DIN adapters will connect to female port ends |
2025-04-04 |
|
DIN Fittings Swivel
1. Definition: 24°DKO swivel connector is according to DIN 3861/DIN EN ISO 8434-4 standard, this end including Fitting body, Nut, O-ring and thrust wire (assembly). There are two types of usage, One is 24°welding cone type nipple (will need nut and o-ring |
2025-04-04 |
|
Hydraulic Fittings DIN Union
1. Definition: DIN 24°cone connections is according to standard of DIN 3861/ISO 8434-1dimension, it is German DIN(DEUTSCHE INDUSTRIAL NORME) type. Union type require the all tube end size is the same as DIN 3861 required 24 deg cone from tube to tube.2. M |
2025-04-04 |
|
